A to wogóle mi ruszy?

Ogólne rozmowy związane z działaniem oraz obsługą systemu Tiger (10.4) na platformie OSx86.

A to wogóle mi ruszy?

Postprzez vampiur » 2 kwi 2008, o 19:31

Czytałem pare tematów na forum i puki co to ludzie to mają takie sprzęta że mi się takie śnią po nocach, a ja dysponuje tylko amd64 3000+ 1gb ram ati 9600xt 256mb. I pierwsze pytanie, da się w ogóle zapuścić macowy system na tym? i kolejne pytanie jaką wersje wybrać jeśli w ogóle coś ruszy? Grzebanie w systemie i eksperymenty mi nie straszne po oprócz m$ shitu mam gentoo, a siedzialem też na netbsd, tak więc jeśli jest jakiś sposób nawet trudny to zrobię ;)
AMD64 3000 (1,8ghz s.939), 1gb ddr 400(geil), Abit av-8 (k8t800pro), Powercolor 9600xt 256mb, Belinea 19' 1980s, Sblive 5.1 sb0060, Maxtor 250gb 16mb sata, pixelview playtv pak bt878
vampiur
 
Posty: 2
Dołączył(a): 2 kwi 2008, o 19:20

Re: A to wogóle mi ruszy?

Postprzez laborman » 2 kwi 2008, o 19:51

Polecam wersje JaS SSE2/SSE3 AMD Intel. W prawdzie to tylko tygrys 10.4.8 ale mi kiedyś na podobnej konfiguracji działał znakomicie.
Commodore 64
OSX 10.5.7 Retail
OSX 10.6 10A394
Avatar użytkownika
laborman
 
Posty: 562
Dołączył(a): 4 sty 2008, o 11:23
Lokalizacja: Deep Space 9

Re: A to wogóle mi ruszy?

Postprzez electro » 2 kwi 2008, o 19:56

ja sprzet mam bardzo podobny do twojego (patrzy mój podpis) ,
maca zainstalowałem (choc miałem problemy),
mac osx to zajebisty system - tylko aby nam ładnie smigał po wgraniu sterów bo chyba własciwie o to chodzi bo apple nie uwzgledniło sprzetu pc tylko robiło system pod swoja maszyne

ja uzywam wersje Zephyroth AMD 10.5.2 Rev.1

http://osx.kbot.de / AMD.osx86

Kod: Zaznacz cały
- EFI v.8
      - Kernel 9.2.0 + System.kext + dsmos.kext
      - Kernel 9.1.0
      - No more ifcstart crash during installation process.
      - No more Lan Freezes whilst using nForce LAN.
      - MBR Bootloader has been fixed.
      - PS2Controller has been fixed.
      - Includes Marvins AMD Utility, Onyx and TextMate. No other third party applications (except if a lot of people ask for it)
      - Includes the following audio drivers:
      - AppleAC97Audio
      - AzaliaAudio
      - ALCinject-883
      - ALCinject-888
      - Includes Zephyroths NVIDIA Universal Installer with the latest kexts from Graphic Update.
      - Includes drivers for ATI :
      - Radeon HD 38x0, 3800, 2900, 2600 and 2400.
      - Radeon X19x0.
      - Radeon X1600.
      - Includes fix for iTunes.
      - Includes the following network drivers :
      - LAN : forcedeth and skge.
      - WiFi : Broadcom (BCM4306,4309,4318,4320 and 4324), Ralink RT73 and RT2500 and Zydas ZD1211/ZD1215.
      - Languages: ALL
      - Updates:
      - Modified Security Update and Remote Desktop Client
      - 10.5.2 Update + Graphic Update
      - Quicktime 7.4.1
      - iLife Update


mozesz sie zainteresowac nowa wersja Leo4All v2 - nie testowałem jej ale moze niedługo :)

Kod: Zaznacz cały
*******************************************************************************
                 Leo4All-10.5.2V2 Universal AMD/INTEL[SSE2/SSE3]
*******************************************************************************
-------------------------------------------------------------------------------
                                 Release Notes
-------------------------------------------------------------------------------

Unrar the Leo4All.ISO and burn with UltraISO or equivilant in Windows, or use
Disk Utility in OSX.


The MD5 Checksum of the ISO should be 6d4e68afb3486baec03b446fb0a5d711


Please support Apple and buy a copy, you won't regret it.

-------------------------------------------------------------------------------
                                 Install Notes
-------------------------------------------------------------------------------
The system is setup by default to boot in Verbose mode. You can change this yourself if you want in /Library/Preferences/SystemConfiguration/com.apple.Boot.plist. I included BBEdit with the applications, it can edit the file in place with correct permissions.


During the DVD bootup if your stuck at "waiting for root device" I am sorry your hardware is probably not supported. You can try changing some options in your BIOS, maybe you get lucky.


If you get error com.apple.boot.plist make sure to change AHCI in the BIOS, alternately your burn could be bad. Try again at a lower speed or with a different program.


If you have an AMD system please check the box for AMD-System-Fix to aplly the patches needed for Leopard to work!!


AHCI works, but you are limited to two drives, turn this off if you have more than 2 drives you need to access.


Video Driver support has been updated. Improved NVidia, ATI and GMA950 graphics support with updated kexts. There are some new options here so take a look. For ATI I added new installers for 2600PRO/2600XT/3850/3870/3870X2. Now GMA950 has an option that will install Vanilla 10.5.2 kexts and Natit


The EFI bootloader automatically detects and installs for MBR/GUID thanks to Dense, it may have specific problems for Bad-Axe 2 systems, though so far there have been no reports of this.


Please select your IDE/SATA chipset during install.(One and only one!)
Added support for some Marvell PATA chipsets, for those ICH9 users that requested it. Choose the ICHx fixed IOATAFamily.kext.


Default selection for kernel is Netkas improved 9.2.0. If you select a Vanilla kernel please uncheck Netkas kernel.


If during the inital account creation your system locks up, try disabling your Network card. You can also visit osx86leo4all.wikidot.com for other directions.


If you installed Video drivers during install and your system freezes before the desktop loads,boot into single user mode with the bootflag -s at the Darwin prompt. Type:
/sbin/fsck -fy
/sbin/mount -uw /
./RemoveVideo
Follow the prompt to choose type of card.
Then type exit to continue booting.


If after you boot to the desktop you get an error about an Extension not being properly installed open the Application I included called Extensions-Repair to correct this automatically.


-------------------------------------------------------------------------------
                               Updates Include
-------------------------------------------------------------------------------



Fixed the Keyboard Language preferences.


Fixed AsianLanguagesSupport(I hope!)


Fixed "About this Mac" crashing Finder on some AMD machines. Again leave feedback if it is still crashes for you.


Improved Nvidia graphics support with updated kexts. Even my 8800 GTS 512 works with these. Still try at your own risk.


If you choose no video driver options all video kext's are removed except ATINDRV.kext, this one is used by Software Updates to verify the Leopard Graphics update is applied. You will have to manually remove this one if needed.


Corrected an issue with some PS2 keyboards on laptops not working(I hope)


Added the latest Time Machine and Security Updates into the installer.


Added Quicktime 7.4.1 update.


Added option to choose Vanilla 9.2.2 kernel.(Intel SSE3 only!)


Updated AppleSMBIOS to latest version by Netkas.


Removed APIC option(Now the installer uses this older ACPIPlatform and AppleAPIC by default, unless you choose a Vanilla kernel)


Added new Applications: Unison, Pacifist, KextHelper


Added support for some Marvell PATA chipsets, for those ICH9 users that requested it. Choose the ICHx fixed IOATAFamily.kext


System Profiler should be working as intended now for everyone.


By request I changed out the AppleIntegratedFramebuffer.kext


Modified the default ACL package, this may speed the install a little for some. It is down to under 15 minutes total for me!
http://osx86leo4all.wikidot.com/
 Informacje i nowości - newsy ze świata Hackintosh. Interesujące strony, fora, niezbędne narzędzia do instalacji PC.Na mojej stronie Facebook http://www.facebook.com/news.hackintosh Zapraszam do subskrypcji strony "Lubię to"
Avatar użytkownika
electro
 
Posty: 233
Dołączył(a): 6 sty 2008, o 21:58
Lokalizacja: Zamość

Re: A to wogóle mi ruszy?

Postprzez vampiur » 3 kwi 2008, o 14:35

No to biorę się do ściągania a potem do instalacji:) a jaki to jeszcze pomyśle, ale miło jest otrzymać tyle fachowych/konkretnych odpowiedzi od razu praktycznie:)
AMD64 3000 (1,8ghz s.939), 1gb ddr 400(geil), Abit av-8 (k8t800pro), Powercolor 9600xt 256mb, Belinea 19' 1980s, Sblive 5.1 sb0060, Maxtor 250gb 16mb sata, pixelview playtv pak bt878
vampiur
 
Posty: 2
Dołączył(a): 2 kwi 2008, o 19:20


Powrót do OSx86 Tiger (10.4)

Kto przegląda forum

Użytkownicy przeglądający ten dział: Brak zidentyfikowanych użytkowników i 2 gości

cron