HP Envy 14

Zastanawiasz się nad kupnem komponentów dla OSx86 i nie wiesz co wybrać? Ten dział może pomóc w kupnie.

HP Envy 14

Postprzez wombat21 » 17 kwi 2011, o 20:18

Witam wszystkich serdecznie. Mam nadzieję, że piszę w dobrym miejscu. Mam pytanie odnośnie tego modelu HP Envy 14:

http://allegro.pl/hp-envy-14-5-i5-2x2-53-500gb-8gb-ati-5650-windows7-i1560152566.html

Czy da rade zainstalować na tej maszynie Mac OS X (najlepiej retail 10.6.6)? Proszę o jakieś porady itp. Pozdrawiam.

PS: Ten laptop porównywany jest do MacBooka Pro w wesji PC :)
wombat21
 
Posty: 2
Dołączył(a): 17 kwi 2011, o 20:12

Re: HP Envy 14

Postprzez wombat21 » 21 kwi 2011, o 13:36

Widzę, że forum kipi życiem... No nic, dzięki mimo to, jakoś sobie poradziłem. Takie oto informacje (tutorial jak zainstalować), znalazłem w sieci. Umieszczam, może komuś się przyda. Pozdrawiam.

HP envy 14
QE

Install Method: Snow Leopard 10.6.6i
Processor: Intel i5 580-M
Hard Drive: 500GB- 7200 RPM
Memory: 4GB - 1 DIMM (DDR3)
Graphics: ATI RADEON 5650
Not working - wifi, webcam, and sleep (it crash, to unfreeze it press again on the power button), i also had trouble with usb (just try USBfix), Graphic Card :(

How i installed it:
1- Boot leohazard 10.6.6i and partitionate your HDD in 2 (the size doesn't matter as far as it's over 10 GB and satisfy your ) input this to boot the DVD:
cpus=1 busratio=20 (don't be surprised if it take time to boot usually can take up to 10min max)
2- One for 10.6.6i and the other one for Windows*/Mac OSX 10.6.2 (10.6.2 will be use to remove kext that cause 10.6.6 not to boot)
3- Once it's done your ready to install 10.6.6
PACKAGE to select for 10.6.6:
*Chameleon_Boot_Loader: chose RC5 or RC4 (i prefer RC5 but it's up to you i don't think that it really matter)
*Kernel: CHECK IT, it's for legacy
*Drivers
*Graphics: NONE (exotic doesn't work)
*Sound: VoodooHDA_0.2.7.2
*Network:
*Lan: NForceLan & RTL81XX
*WLAN: none of them worked for me
*Laptop: VoodooPS2Trackpad
*Chipset: I selected AHCIPortinjector & ATAPortinjector & JMicronATA
*Sata_Pata: AHCISATAFix
*Patches:
-DSDT_Patcher
-NTFS (if you wish to be able to read/write on NTFS)
-UUID
-USBFix (you might need it, did not installed it and it's not detecting my usb key (FAT32))
(X11 if you plan to use it)
4- Now reboot and eject 10.6.6i hazard DVD and insert 10.6.2 hazard (boot on it) (in order to delete kext that mess up with graphics)
5- Install 10.6.2 on the empty partition
6- ONLY INSTALL this (do not select any Bootloader you already have one)
* 10.6.2 update combo
* Kernel: Legacy_Kernel_10.2.0 (others didin't worked for me)
* Graphic_Drivers: NONE
* Audio: voodooHDA and AppleHDA
* Network: I put BCM5787 (ethernet works)
* Laptop_Support: INSTALL VOODOOPS2 (or you will be stuck to do you wish to transfer data menu)
* System_Support:
-CMOS_RESET_Fix: Apple RTC
-SATA_ATA_Fix: AHCI_SATA_Fix
-SMBIOS Resolver
-Fakesmc_v1.0
P.N each single time you want to boot osx 10.6.2 you will have to put (cpus=1 busratio=20 ) anyway you only need 10.6.2 to edit 10.6.6i files (refer to 10.6.2 section for what works or not)
7- Once everything is setup, boot into 10.6.2 and select(navigate into it) the partition where you installed 10.6.6
8-navigate to System\Library\Extensions and delete this stuff:
-AppleIntelHD (there might be 4-5 backup them if your not sure)
-ATI5000Controller.kext (or something like that)
-Pasting ATI5000Controller.kext (from lion as been report to work, but mine did not (but i let it there))
9-Reboot, and your good to GO
10-Select 10.6.6i, partition, before hiting enter, input this:
cpus=1 busratio=20 PCIRootUID=1 GraphicsEnable=yes
11-Now if you wish you can wipe 10.6.2 and replace it with windows, or wipe it and extend your 10.6.6 space there so many options
12-VOILA -illegalmexicain-
wombat21
 
Posty: 2
Dołączył(a): 17 kwi 2011, o 20:12


Powrót do Jaki sprzęt wybrać?

Kto przegląda forum

Użytkownicy przeglądający ten dział: Brak zidentyfikowanych użytkowników i 1 gość

cron